8/10/2016
Scotty Thiel
Scotty Thiel - Doomed at Dodge followed by Hard Charge Top 10 at PDTR
Scotty Thiel and the #64 STM team raced a double header weekend with the IRA Sprints. Night one started at Dodge County Speedway in Beaver Dam, WI where Scotty was running in the top three before a nozzle line fell off and forced him to pull off for the night. The team followed that event up at Plymouth Dirt Track at the Sheboygan County Fairgrounds on Saturday where they started off the night changing engines but later found out a fuel line was the gremlin. Scotty would charge his way through the field and overcame the night with a top 10 finish in the A-main event.
Friday night at Dodge County Speedway, Scotty drew a 66 pill which placed him to go out 21st in the qualifying order. 23 cars were in attendance for the IRA Sprint portion of the evening. Scotty laid down a 17.486 lap time which was 7th quick overall. He would go on to start the heat race event in the fourth position. On the start, the lead car did not get on the throttle right away and Scotty got into the back of that car and fell back several positions as they went into turn one. After coming out of turn two, Thiel was back to the seventh position. Within the next six laps, Scotty moved forward and got back into the fourth position before the checkered flag flew. This locked him into the 25 lap A-main event and also into the nights redraw. However, the worse pill was picked for Scotty as he would go on to start the main event in the 10th position. The field took the green for the 25 lap A-main event. Scotty charged up to the fifth spot in the first corner on the first lap. He continued to build up his momentum and move forward before a caution came out. The field lined back up and after taking the green flag again, Scotty continued to move forward. He drove into the third spot and had his sight on the leaders. Just shy of the halfway mark of the event, Scotty’s engine made a lower tone noise and he quickly pulled into the infield. His night would end at that point in time and ended up being scored in the 17th position. After the crew looked over the car, it appeared that a nozzle line fell off of the motor which pushes fuel into the cylinders. The noise came from one cylinder not having fuel getting pushed into it. “I made the right call to pull in after I heard the engine change tune. It was an easy fix though and I could have made it back out. I’m just disappointed for my guys and partners behind us. We had a fast car all night long and we weren’t even halfway.” Stated a disappointed Thiel after the conclusion of the event.
The team then travelled back home and prepared for Saturday night’s action at the Plymouth Dirt Track in Plymouth, WI. Scotty drew a 56 pill for qualifying which placed him to be 29th out of 30 cars for qualifying. As the drivers were getting pushed out for engine heat, Scotty’s car would not fire off. He came back to the pits and the crew went to work to figure out the problem. They made a few changes but the car still would not fire. The decision was made to change the engine before qualifying and they missed their hot lap session. The engine was changed quickly but they still encountered the same issue as the engine would not fire. The team finally made a fuel line change and that solved all of the problems. It appeared that the main fuel line had some issue where it sucked air and did not allow the fuel to flow properly, thus, making the engine not receive enough fuel to start. Unfortunately this discovery happened a few minutes too late and Scotty would miss his qualifying attempt. He knew he would have his work cut out for him but this was the start of his nightly mission. He would start 10th in the heat race event. Top six transferred into the 27 lap A-main event. Heat race winners would go on to the redraw. The green flag flew and Scotty stormed into turn one in the middle of the track. He picked off three cars right away and continued his charge down the backstretch. He worked the bottom groove and slowly picked off cars one by one. A late race caution came out with three laps to go and Scotty had charged his way into the third position! After going back to green he made an attempt to move into second but slid back a little bit and lost some ground. He would go on to settle for a third place finish which would lock him into the A-main event but he would start deep in the field due to not having a qualifying time. Scotty started 19th in the A-main event. 27 lap event for the Frank Filskov Memorial event. At the drop of the green flag, Scotty charged to the top side of the track and began his mission forward. He picked off several cars early on before moving back down to the bottom and made more progress. He moved into the top ten with only 6 laps to go and a caution came out one lap later. This allowed the field to get bunched back up. After the restart, Thiel continued his pace on the bottom and picked off a few more positions but struggled to get around a car with two laps to go and would end up settling for an 8th place finish. “It was a respectable night for our team after starting off way behind the 8 ball. We struggled figuring out the issue on the car and just one fuel line was the issue. Our luck has not been good lately and it’s been a little frustrating for everyone. We had a really great car tonight, these guys worked their tails off literally all night long. We were better than 8th tonight, I just struggled at the end to move up a few more spots. We have a weekend off now with the Nationals coming up so this will be a great time for us to regroup and focus on the triple header weekend coming up next.” Stated Thiel.
The Scott Thiel Motorsports team will be off this coming weekend as the annual Knoxville Nationals are on tap. They will return back to action with the IRA Sprints on Friday August 19th at Wilmot Raceway for the Kenosha County Fair event. The team will again be at Wilmot on Saturday August 20th and they will follow the weekend up on Sunday at Angell Park in Sun Prairie, WI.
Keep up to date on all of Scotty’s upcoming events on www.scottythiel.com and also on the Scott Thiel Motorsports social media pages, www.facebook.com/ScottThielMotorsports.
Scott Thiel Motorsports would like to thank all of their great marketing partners for the 2016 racing season and encourages everyone to check out these fine companies! Please support the people who support racing!
Professional Plating Inc:
Conveniently located employer in Brillion, WI; Professional Plating has been in business since 1979 with a facility over 200,000 sq. ft. to meet and exceed your expectations of supplying Class A coatings to all sorts of recreational and production customers. PPi serves customers with needs of power coating, zinc plating and e-coating! You can see their work on the web at www.proplating.com or give them a call at 920-756-2153 to discuss your next project!
Scott Thiel Builders:
Since 1985, Sheboygan, Wisconsin based Scott Thiel Builders has been in the new home building and remodeling industry serving clients all over the central lake shore counties of Wisconsin. Our outstanding reputation speaks for itself through our skilled craftsman who strive for perfection to create a masterpiece you have dreamed about. Attention to detail is used in a variety of ways at Scott Thiel Builders because we not only strive to achieve excellence on each project we work on but to also be attentive to our client and make sure they experience the best possible service through the entire building process and the years to follow. Check out what Scott Thiel Builders can provide for you today at www.scottthielbuilders.com!
Complete Water Inc:
Complete Water Inc specializes in Rentals, Iron Filters, Well Inspections, Salt Delivery, Sales, Drinking Systems, Complete Well Systems, Bottled Water, Reverse Osmosis, Irrigation & Sprinkler Systems, Well Systems, Well Pumps & Pressure Tanks, Rheem, MacClean, and American Standard. Contact Complete Water for any of your water needs!
SixFour Promotions:
SixFour Promotions is a motorsports marketing company driven toward promoting motorsport events and helping drivers/teams seek potential marketing partners. From marketing proposals to full event promotions, SixFour Promotions knows what it takes to have complete marketing success. To learn more about what SixFour can offer you, look them up on www.facebook.com/SixFourPromotions
VMS Motorsports:
VMS is a family business established in 2007 and has evolved into one of the leading suppliers of rod ends and radius rods in the racing industry worldwide. From Midgets to Modifieds, Legends to Late Models and everything in between, VMS Motorsports has you covered. Individualized customer service ensures that every one of our customers gets the right piece for their application. VMS Motorsports always keeps a full inventory on hand even through the off-season. This, coupled with our Monday-Saturday shipping, ensures that VMS Motorsports gets you back on track…FAST. If you are in the market for Rod ends, radius rods and many other racing products, check out what VMS Motorsports has to offer by checking them out online at www.vmsmotorsports.com!
Hepfner Racing Products:
For well over a decade, Hepfner Racing Products (HRP) has led the industry in innovative designs and manufacturing technology. From a wide range of racing components to a full line up of trailer accessories, HRP offers a large variety of items for virtually every form of motorsports. HRP is also the manufacturer of Streeter Super Stands, the original and genuine home to kart racing's Big Foot and Stacker Stands as well as a very popular lineup of full kart racing pit & trailer accessories and kart stands. We are proud to design, manufacture, package and ship all of our products from our Hartford, WI USA facility. To learn more on what HRP can offer you, check them out on the web at hrpracing.com!
QTM Brakes:
Innovations in braking since 1999 has led QTM to be one of the top brake companies in the business. From open wheel, off road, late model racing and street vehicles, QTM provides a wide range of brakes and accessories for all applications. Their innovated technology allows the brakes to be the best in the business and the stopping power is incredibly noticeable to drivers in all platforms. Check out www.qtmi.com for more information!
Triple X Race Co:
At Triple X Race Components, we don’t just build race parts – we race too. We know how expensive it is to race. That’s why we offer the most common Sprint Car, Midget, and 600 Mini Sprint parts. We keep our costs down by building thousands of each part. We build the parts that get damaged the most. With our discounted pricing, you can afford to race hard and race to win.
Ti22 Performance:
Ti22 Performance is the leading manufacturer of high-performance titanium race parts. Focused on the Sprint car and Motorsports industry, Ti22 offers drivers a superior line of products that outlast and out perform the competition. Check them out at www.ti22performance.com!
Torsion Bar Rate:
Torsion bar testing has been around as long as the bar has. There are many different ways to test bars, but they all have the same goal.... to compare one bar to another and give the results in a numerical value (PSI, FORCE POUNDS, RATE). This is good, but can be hard to understand. We simplify this process. The numbering system we use is standard to the torsion bar industries. During our test sessions, data is collected and stored in our software, which then calculates it to a torsion bar size that everyone can understand. We have found 1025 bars that test between a 1012 and a 1036 bar. Our test services take away the guesswork. We provide you with a TORSION BAR RATE. Check out www.torsionbarrate.com for more info!
Rhey Graphics:
Rhey Graphics will take your next project over-the-top. We can supply you with the creative edge that's become a necessity in today's competitive marketplace. So whether it's a logo design, vehicle graphics, brochure, or full-color banner, we can handle your project from start to an outstanding finished project.
Vahlco Racing Wheels:
VAHLCO RACING WHEELS is a newly formed aluminum racing Wheel Company based in New Egypt, NJ focused on producing dirt oval track wheels to the highest standards of quality, durability, usability and precision. Dirt oval track racing and grassroots efforts is what racing in the United States was built on and it is our mission to produce, quite simply, the best wheels. Other companies may be the household name every racer knows, but Vahlco is ready to set the new industry standard. We are RACERS. We are DRIVEN. We are READY. Vahlco Racing Wheels. Made by RACERS for RACERS. Check them out at www.vahlco.com!
Super Shox:
Since 1997 Super Shox has been dedicated to building high performance shock absorbers with extreme durability at a reasonable price. Each year more racers make the switch to Super Shox and it shows with wins and championships. Super Shox have high quality products that will give you an advantage. Besides building a quality product customer service is at the top of our list to keep you satisfied and winning races. Please give us a call or e-mail to discuss how we can serve your needs. 847. 548.SHOX
Photo Credit: RC Custom Design
Article Credit: SixFour Promotions
Submitted By: Scotty Thiel
