4/18/2016
Brady Bacon
Brady Bacon – Second at Bloomington!
Brady Bacon – Second at Bloomington!
(Bill W) April 18, 2016 – Brady Bacon and the Hoffman Racing #69 team turned in a solid weekend of USAC racing in Indiana. Finally, Mother Nature was a race fan! The Broken Arrow, Oklahoma driver led laps three through eighteen at Bloomington Speedway on Friday before settling for second in that 30-lapper. He would surge from tenth to finish sixth at Tri-State Speedway near Haubstadt on Saturday. This Saturday night, USAC will make a rare appearance at Montpelier Motor Speedway in Montpelier, Indiana. It will mark Brady’s first trip to the ¼-mile oval.
Brady timed in fourth quick on Bloomington’s ¼-mile, before driving from sixth to second in his heat race. “It was pretty standard Bloomington as far as the track went,” he says. “There was a little strip to run around the bottom, and a groove on the top.”
Starting fourth in the feature, he would work his way to the front early on. “We were able to get to the lead about lap five or six of the feature,” says Brady. “We led until about ten to go. We were out there by ourselves, which is kind of a dangerous place to be sometimes.”
Dangerous, because the drivers behind you can search around the track comfortably. “(Bryan) Clauson just got going around the top all the way around and got by me,” says Brady. “That was kind of a hard one to lose for us. We were really good the whole race. We just picked the wrong part of the track at the end.”
On Saturday, Brady was tenth quick at Haubstadt. “We were the first car out, which is usually tough at that track,” he says. “It usually works in a groove during qualifying. Obviously, we didn’t hit that. I picked the wrong part of the track. I thought the groove would be the middle and it wound up being the top.”
After cruising to a second place finish in his heat, he would line up outside of row five for the main event. “We had a decent car,” says Brady. “It was just tough to pass and make up ground. When you are out by yourself, you can make some really good laps, but when you’re bottled up, it’s hard to pass. We just kind of picked our way up through there slowly.”
In the late going, Brady was setting a good pace in traffic, but settled for sixth. “There was a caution at the end that we really didn’t need,” he says. “We were a little better in traffic than some of the guys in front of us. I wish we could have had a couple more laps in traffic, but it was one of those nights that you just plug away, and then you go on to the next one.”
Follow Brady on his Website, Twitter and Facebook!
Follow Brady at his website located at www.BradyBaconRacing.com! Also keep up with him on Facebook and Twitter (which also can be accessed at the website) at the following links…
Twitter Link – http://twitter.com/BradyBacon
Facebook Link - www.facebook.com/pages/Brady-Bacon-Racing/278125555137
Partner of the Week – Triple X Race Components
At Triple X Race Components, we don’t just build race parts – we race too. We know how expensive it is to race. That’s why we offer the most common Sprint Car, Midget, and 600 Mini Sprint parts. We keep our costs down by building thousands of each part. We build the parts that get damaged the most. With our discounted pricing, you can afford to race hard and race to win. All Triple X components are produced in our ISO 9001 certified factory. They are laboratory tested, race tested, and universally approved. Whether you are a new customer or a repeat customer, you can be assured that you’re buying race-proven products at great prices. We guarantee it. Triple X has established a large network of dealers coast to coast and internationally to serve your needs. Please stop by your local dealer and check out our newest products. Check Triple X Race Co. out on the web at www.XXXRaceCo.com!
Associate Marketing Partner of the Week – Wilwood
Wilwood Engineering designs and manufactures high-performance disc brake systems. Since the company’s inception in 1977 by Bill Wood, we have developed a substantial matrix of brake components and engineering techniques that allow us to quickly and reliably create brake systems for almost any application. Our core ability is the rapid development of custom engineered brake systems using a combination of off-the-shelf and custom components. In addition to designing and manufacturing brakes for all types of competitive motor sports, Wilwood also manufactures brake systems and components for agricultural equipment, industrial applications, utility vehicles, snowmobiles, quads, motorcycles and military vehicles.
With headquarters in Camarillo, California, Wilwood employs approximately 250 people. We have on-shelf stock of more than 300 different brake calipers, 200 rotor designs, 100 master cylinder designs and a wide assortment of brackets, fittings, valves and brake lines. Our off-shelf brake calipers range in size from tiny calipers used on go-carts and light duty industrial equipment, to heavy duty original equipment brakes for the U.S. military Humvee.
Wilwood's engineering department uses the latest computer-aided design and manufacturing techniques in conjunction with finite element analysis, dynamic test and cycle test equipment, to find high-performance and reliability solutions for the most difficult braking tasks. Our extensive inventory of proprietary on-the-shelf components allow us to provide cost-effective solutions for unique brake applications.
Wilwood is ISO 9000 compliant and has extensive experience maintaining quality levels of 100ppm or less for original equipment manufacturers. Visit Wilwood online at www.Wilwood.com!
Brady Bacon Racing would like the following sponsors for all their help: Fatheadz Eyewear, Viper Risk Management Group, Triple X Race Co., Tel-Star Technologies, PPM Titanium Products, KTA Kiser’s Truck and Auto (formerly Sham’s Garage), Heath Clips Lawn Care, Chubby from CnB Mushroom Farms, Lucas Oil Products, Factory Kahne, FK Indy, Lightning Wings, CP Carrillo, Keizer Wheels, Smiley’s Racing Products, Eaton Industrial Coatings, Sweet Mfg., Butlerbuilt Seats, Brown and Miller Racing Solutions, Proglide Coatings, Diversified Machine Inc., Fuel Safe, Allstar Performance, Simpson, Octane Ink, Schroth Racing, Wilwood, King Racing Products and Schoenfeld Headers.
The Hoffman #69 sprinter is sponsored by Mean Green, Mopar, Triple X Race Components, Hoosier, DMI, Lykins, Engler Machine & Tool, Goodridge Fluid Transfer Systems, KSE, MPD Racing, CSI Shocks, XYZ Machining, Saldana Racing Products, Fuel Safe Racing Cells, Fastener Specialty Motorsports, Wilwood Brakes, Joe Gibbs Driven Racing Oil, Zemco Headers, Chalk Racing Products and Weld.
Photo: Brady competes at Bloomington (Collin Markle Photo – Purchase at http://collinmarklephotography.smugmug.com/)
Bill W Media
Monroe, IA USA
Twitter: @BillWMedia
e-mail: sprntcar@hotmail.com
