---

Mark Burch Motorsports – Back in Black

NEWTON (July 29, 2010) – Consistency will stay the theme for the Mark Burch Motorsports, Chad Humston Racing team. If you take a good look at the past couple of weeks, you won’t see anything less than the definition of consistent. It’s been all about the experience for Chad and the crew, and lucky for them they can’t get enough!

It was back to their home track of Boone County Raceway in Albion , Nebraska for their Friday night show. “With the threat of weather in the forecast, it proved to be just the right choice.” Owner Mark Burch had to say.

After last weekend’s events the team worked this week to get the car fresh and ready; they unloaded the Engler Machine and Tool #1M with a re-freshened engine and the plan was to get it broke in with a few laps before taking it to Knoxville. What a plan that was! Not only did they put a few laps on it, but they also claimed a feature win on their first night out with it.

Saturday night took the team back to Knoxville Raceway for another challenging night. With different faces making their way to town in preparation for the upcoming 360 Nationals and many of the 410 drivers pulling double duty in both the 410 and 360 classes, it would be trials.

Chad started the night qualifying seventh fastest and brought the #1M home with a deserving second place finish in his heat, after a good battle to get there. “The nice part about qualifying seventh is that we would sit on the front row of the A-Main.” Owner Mark Burch said. The Engler Machine and Tool #1M started first row outside for the feature. After a tough start, which put Brian Brown in the lead, you could bet that Chad was chasing him down. Chad was challenged by Garner but managed to wheel the #1M through traffic and within striking distance of Brian Brown. Chad finished the night with a justifiable second place. “We really wanted the win, but second is all we could muster against one of the hottest drivers in the Midwest . Congratulations to Brian Brown and crew. It was a great race” Said Chad .

“We’re going to have to leave this yellow car home. It only knows how to run second here!” Owner Mark Burch exclaimed. So, as the team will have it, they are headed back to Knoxville Raceway this weekend and they will be “Back in Black”. Make sure you get out there to cheer them on as they make a few more laps around the famed half mile, in preparation of the much anticipated 360 Nationals.

New Marketing Partners Needed and Welcomed for the 360 Nationals

The Mark Burch Motorsports team is always looking to work with new partners to help them achieve their advertising goals. For more information please contact Mark at mark@markburchmotorsports.com

Online
To keep up with Mark Burch Motorsports, check them out online at http://www.markburchmotorsports.com/

You can also follow Chad , of Chad Humston Racing, by checking him out online at http://www.chadhumston.com/!

For weekly updates on Mark Burch Motorsports, join our mailing list by emailing “MB Motorsports” to kzcommunications@rocketmail.com.

Mark Burch Motorsports
The mission of Mark Burch Motorsports is to be an innovator in the unrefined business of Sprint Car racing on dirt, while representing our sponsors and manufacturers in a professional and positive manner both on and off the track. It is our goal to develop and improve our winning spirit and carry on our winning tradition by utilizing the growth of close personal relationships throughout our organization. This pursuit of excellence is the fuel that feeds the fire of our souls.

Engler Machine and Tool, Inc.
Engler Machine was started in 1980 by Tim Engler. His main line of business at that time was plastic injection molds. Over the years he has diversified very widely leaning more towards "high performance products". He now builds fuel injection systems, custom made pulling chassis, gears, shafts, specialty CNC products, racing engines and some custom machining.

Tim has been involved in tractor pulling and holds 13 national titles in that sport, he no longer pulls himself but has been influential to the success of many other pullers through his advice and building capabilities. He races winged sprint cars when time allows this is something he truly likes and wishes he had more time to do.

Currently, Tim and his staff have been developing a new mini-sprint fuel injection system. There are a handful of these units currently being dyno and track tested with great results. Look for full production of these units this summer. Please call 812-386-6254 for more information. (www.englermachine.com)

Aaron Elliott - Arrow Truck Sales – Kansas City, MO.
Arrow Truck Sales, Inc. began operations in 1950 from a small used truck lot in downtown Kansas City, Missouri. From the initial start-up, the company has followed the principle of providing high-quality, pre-owned vehicles to customers who want to maximize the value of money. Arrow has always followed a policy of honesty and full disclosure. We place high value on the reputation we've built throughout the North American trucking industry. Our pledge: We are not going to jeopardize our reputation for the sake of avoiding a little work or for a short-term profit based on misleading practices. Unlike some of our competitors, we carry a wide selection of all makes and models. With over 2,000 trucks in inventory, we can find the right truck to fit your needs. And since our inventory changes daily, we are always looking to buy quality, pre-owned units as well. So when you have a single unit or a fleet to dispose of, call us. With branches located throughout the United States and Canada, we are always close by. Quality, value and selection - Arrow Truck Sales, Inc. is your best source of pre-owned medium and heavy duty trucks in North America. The Volvo Group is one of the world's leading manufacturers of trucks, buses and construction equipment, drive systems for marine and industrial applications, aerospace components and services, and is one of the world's leading producers of heavy-diesel engines (9-16 liter). The Group also provides complete solutions for financing and service. The Volvo Group, which employs about 96,000 people, has production facilities in 19 countries and sells their products in more than 180 markets. Volvo Group sales for 2009 amounted to approx. 29 BUSD. The Volvo Group is a publicly-held company headquartered in Gothenburg, Sweden. Volvo Shares are listed on Nasdaq OMX Nordic Exchange and are traded OTC in the US. Call 800-311-7144 for more information about Arrow Truck Sales, or download the brochure. (http://www.arrowtruck.com/docs/locations.details.aspx?branch=KC aelliott@arrowtruck.com)

WolfWeld Chassis
WolfWeld racing chassis and custom welding located in Tea, South Dakota. Contact Doug Wolfgang at 605-368-9955 for more information.

Whitetail Paradise
Whitetail Paradise Outfitters offers a one of kind hunting experience. They are nestled along the scenic Pine Creek, near Long Pine, Nebraska. Whitetail Paradise Outfitters is an all inclusive outfitter offering rifle, archery and black powered hunting. They specialize in Turkey hunts, Whitetail or Mule deer hunts, Goose hunts, predator hunts and also offer seasonal trout fishing and seasonal Wing hunts as well. Your hunt pricing includes lodging, food, RV hookups, a scent free gear storage unit and trout fishing! For more information please contact Bruce Rossman at 402-340-6255 or visit the website at http://whitetailparadisellc.com/

Triple R Tire
For all of your Farm, Truck and Automotive tire needs contact: Bruce Rossman at 402-925-5633. Triple R Tire, 47641 Us Highway 20, Atkinson, NE 68713.

S & S Welding, Inc.
Since 1980, S & S Welding, Inc. had been an industry leader in manufacturing the finest custom-built motorcoaches and trailers. Our distinct and innovative designs provide image and impact for all of our customers. From our basic tag trailers to out most elaborate motorcoach and trailer combinations, our quality continues to prove our dedication to each customer. (http://www.ssweldinginc.com/)

Vortex Racing Products
Vortex Racing Products is the industry leader in Sprint Car Wing design. From humble beginnings in 1995 where we began producing wings for our own use we quickly became engaged in producing wings for other race teams. Inspired by a life-long background in racecar design and manufacturing from our Dad, we (Paul and Lynton) continued to evolve into a company known for producing a product a little different from the rest. This ability to manufacture a Wing that is unique in design is what has been our success. With the use of our own race teams in Australia and America, we continually push the boundaries of design with an extensive testing program of our products each and every year. It is with our understanding of chassis design and manufacturing that we are able to communicate with our clients and tailor a wing package that best suits their driver, team and make of chassis. We call this,” The Vortex Advantage”. (http://www.vortexracingproducts.com.au/)

Mark Burch Motorsports would like to thank the following product sponsors; Schoenfeld Headers (http://www.schoenfeldheaders.com/); Total Seal Piston Rings (http://www.totalseal.com/); Manton Push Rods (http://www.mantonpushrods.com/); Ultra Lite Brake Components (http://www.reddevilbrakes.com/page/page/890208.htm); Pro Shocks (http://www.proshocks.com/); Dyers Top Rods (http://www.dyersrods.com/); King Racing Products (http://www.kingracingproducts.com/King_Racing_Web_Site/Index.html); Speedway Motors (http://www.speedwaymotors.com/); Weld Racing (http://www.weldracing.com/); Hoosier Tire (http://www.hoosiertire.com/); Harris Decals (http://www.harrisdecals.com/); Eckley Racing Engines (http://www.eckleyracingengines.com/); Rage Fuel Systems (http://www.ragefuelsystems.com/); Electomotive Engine Controls (http://www.electromotive-inc.com/); Huggins Cams (); Wireless Amber Alerts (https://www.wirelessamberalerts.org/index.jsp); National Rod Ends; Wulff Pumps (http://www.wulffpumps.com/); Shaver Wesmar Gear Drives (http://www.wesmarracing.com/components_sw.htm); CV Products (http://www.cvproducts.com/Default.aspx); and Saldana Racing Products(http://www.saldanaracingproducts.com/)

Back to News