5/15/2017
Scotty Thiel
Scotty Thiel – Podium Performance at Beaver Dam Raceway
Saturday night the Scott Thiel Motorsports #64 team traveled to Beaver Dam Raceway in Beaver Dam, WI to race with the IRA Series. After setting quick time in qualifying, driver Scotty Thiel would go on to finish third in the heat race event and would come home with a strong second place finish in the 30 lap main event!
27 cars were signed into Beaver Dam on Saturday night. Scotty drew a 29 pill which placed him 15th in the qualifying order. After laying down a 12.464 lap time, that was Quick Time on the night! That would place Thiel to start fourth in the first heat race event as they invert 4 cars based on qualifying. The start of the heat didn’t go so well as Scotty struggled to gain ground. He fell back to fifth position but would work his way back up to the third position and transfer into the nights 30 lap main event. Because of his qualifying efforts, Scotty was locked into the nightly redraw. One of Thiel’s little race fans drew the #1 starting position for the A-main event. The field took the Green Flag for the 30 lap main event. Scotty quickly jumped out into the early lead and held it for several laps before making a small bobble in turn one and fell back to the second position. A caution came out on lap 15 and would reset the field. After returning to green flag action, Thiel worked the low groove and pulled alongside the leader coming out of turn two but wasn’t able to make the pass for the position. He dropped back into the second spot and continued his chase forward. Lap traffic became very heavy and the lead car and Thiel worked their way around quickly. Scotty was able to gain some ground in lap traffic but just not enough to make a pass to take over the lead. The checkered flag flew and Scotty would cross the finish line in the second position, recording his first podium finish for the 2017 season. “We started off very strong tonight and were able to capture our first quick time for the year. My guys worked really hard and gave me a great car all night long. We were pretty good in the main all night, I don’t think we could have done much more to the car. It was a rocket but I just made some small mistakes that cost a little bit of momentum to get the lead back. All in all it was still a great night for our entire team. I cannot thank all of our great marketing partners enough for their support to our program!” Scotty mentioned at the end of the night.
Next on tap for the #64 team is this coming Saturday night at the Wilmot Raceway with the Arctic Cat Allstar Circuit of Champions along with the IRA. The team will then travel to Angell Park Speedway in Sun Prairie, WI on Sunday with both series.
STM would like to thank all of their marketing partners for all of their support in the 2017 season. They encourage everyone to check out these fine businesses and support those who support racing!
Professional Plating Inc:
Conveniently located employer in Brillion, WI; Professional Plating has been in business since 1979 with a facility over 200,000 sq. ft. to meet and exceed your expectations of supplying Class A coatings to all sorts of recreational and production customers. PPi serves customers with needs of power coating, zinc plating and e-coating! You can see their work on the web at www.proplating.com or give them a call at 920-756-2153 to discuss your next project!
Scott Thiel Builders:
Since 1985, Sheboygan, Wisconsin based Scott Thiel Builders has been in the new home building and remodeling industry serving clients all over the central lake shore counties of Wisconsin. Our outstanding reputation speaks for itself through our skilled craftsman who strive for perfection to create a masterpiece you have dreamed about. Attention to detail is used in a variety of ways at Scott Thiel Builders because we not only strive to achieve excellence on each project we work on but to also be attentive to our client and make sure they experience the best possible service through the entire building process and the years to follow. Check out what Scott Thiel Builders can provide for you today at www.scottthielbuilders.com!
Wm W. Meyer & Sons / Meyer Racing:
Today, Meyer & Sons, Inc., is a world leader in the manufacture of dry bulk material processing equipment, pneumatic conveyors, dust collectors, insulation blowing machines and vacuum collection systems. By continuing Bill Meyer's tradition of developing innovative machinery and committing to the highest standards of quality, craftsmanship and customer service, the company he founded in 1933 has continued to grow steadily into its second, third and now fourth generation of family ownership. Meyer Mission Our mission is to exceed your expectations as the preeminent manufacturer of exceptionally high quality, innovative and intelligently engineered equipment. We concentrate on providing you with value-added solutions whether you are looking for system components for air process/bulk material handling systems, or are a residential contractor or professional air duct-cleaning provider. Meyer Vision Our vision is to position Meyer as the foremost manufacturer of system components for air process/bulk material handling systems, insulation removal vacuums/blowing machines for those involved with residential insulation needs, and air duct cleaning equipment for professional residential and commercial cleaning services. Every decision that we make today is based on a long-term growth strategy that includes hiring decisions, training programs, and impeccable customer service. Check out what Meyer can offer you today by checking out wmwmeyer.com!
Complete Water Inc:
Complete Water Inc specializes in Rentals, Iron Filters, Well Inspections, Salt Delivery, Sales, Drinking Systems, Complete Well Systems, Bottled Water, Reverse Osmosis, Irrigation & Sprinkler Systems, Well Systems, Well Pumps & Pressure Tanks, Rheem, MacClean, and American Standard. Contact Complete Water for any of your water needs!
SixFour Promotions:
SixFour Promotions is a motorsports marketing company driven toward promoting motorsport events and helping drivers/teams seek potential marketing partners. From marketing proposals to full event promotions, SixFour Promotions knows what it takes to have complete marketing success. To learn more about what SixFour can offer you, look them up on www.facebook.com/SixFourPromotions
VMS Motorsports:
VMS is a family business established in 2007 and has evolved into one of the leading suppliers of rod ends and radius rods in the racing industry worldwide. From Midgets to Modifieds, Legends to Late Models and everything in between, VMS Motorsports has you covered. Individualized customer service ensures that every one of our customers gets the right piece for their application. VMS Motorsports always keeps a full inventory on hand even through the off-season. This, coupled with our Monday-Saturday shipping, ensures that VMS Motorsports gets you back on track…FAST. If you are in the market for Rod ends, radius rods and many other racing products, check out what VMS Motorsports has to offer by checking them out online at www.vmsmotorsports.com!
Hepfner Racing Products:
For well over a decade, Hepfner Racing Products (HRP) has led the industry in innovative designs and manufacturing technology. From a wide range of racing components to a full line up of trailer accessories, HRP offers a large variety of items for virtually every form of motorsports. HRP is also the manufacturer of Streeter Super Stands, the original and genuine home to kart racing's Big Foot and Stacker Stands as well as a very popular lineup of full kart racing pit & trailer accessories and kart stands. We are proud to design, manufacture, package and ship all of our products from our Hartford, WI USA facility. To learn more on what HRP can offer you, check them out on the web at hrpracing.com!
Keizer Wheels/K2W Precision Inc:
We at K2W Precision Inc have dedicated ourselves to producing a wheel of the highest quality. Holding both weight and strength as our engineering focal points, we produce many wheels which are both competitive and affordable. Our Keizer wheel parts are cold spun with U.S. aerospace quality aluminum to meet precise tolerances. Our double spun, cold, drawn parts in combination with our unique and protected heat treat processes give us our perfect part. All wheel components are made from 6061 T6 cold forged Billet and are CNC machined to specs. Our magnesium components are cast by experienced US aircraft casting suppliers, before in house CNC work begins. Lastly, we feel we have the finest service a custom racing shop can offer. All questions are welcome. We invite you to be our satisfied customer. We are the “Keizer” of the racing wheel world.
King Racing Products:
King racing products was founded by Blake & Brock Robertson in Visalia Ca. in 2007. King Racing products is a racer run company as all that are involved have some attachment to motorsports. The constant attention to detail and high quality products are what make King Racing one of the most respected brands in the industry. When the first aluminum chips hit the floor in the spring of 2007 it was the start to a new beginning. King Racing started with 1 CNC machine and a lot of ambition and dreams. The King Racing product line started with 10 items and today it consist of over 300.Over the past 9 years King Racing’s core values consist of quality products, superior customer service, product safety, product strength and making racing affordable. The Robertson’s are dedicated to the motorsports industry and want King Racing Product’s legacy to continue for many years.
QTM Brakes:
Innovations in braking since 1999 has led QTM to be one of the top brake companies in the business. From open wheel, off road, late model racing and street vehicles, QTM provides a wide range of brakes and accessories for all applications. Their innovated technology allows the brakes to be the best in the business and the stopping power is incredibly noticeable to drivers in all platforms. Check out www.qtmi.com for more information!
Triple X Race Co:
At Triple X Race Components, we don’t just build race parts – we race too. We know how expensive it is to race. That’s why we offer the most common Sprint Car, Midget, and 600 Mini Sprint parts. We keep our costs down by building thousands of each part. We build the parts that get damaged the most. With our discounted pricing, you can afford to race hard and race to win.
Torsion Bar Rate:
Torsion bar testing has been around as long as the bar has. There are many different ways to test bars, but they all have the same goal.... to compare one bar to another and give the results in a numerical value (PSI, FORCE POUNDS, RATE). This is good, but can be hard to understand. We simplify this process. The numbering system we use is standard to the torsion bar industries. During our test sessions, data is collected and stored in our software, which then calculates it to a torsion bar size that everyone can understand. We have found 1025 bars that test between a 1012 and a 1036 bar. Our test services take away the guesswork. We provide you with a TORSION BAR RATE. Check out www.torsionbarrate.com for more info!
Rhey Graphics:
Rhey Graphics will take your next project over-the-top. We can supply you with the creative edge that's become a necessity in today's competitive marketplace. So whether it's a logo design, vehicle graphics, brochure, or full-color banner, we can handle your project from start to an outstanding finished project.
Super Shox:
Since 1997 Super Shox has been dedicated to building high performance shock absorbers with extreme durability at a reasonable price. Each year more racers make the switch to Super Shox and it shows with wins and championships. Super Shox have high quality products that will give you an advantage. Besides building a quality product customer service is at the top of our list to keep you satisfied and winning races. Please give us a call or e-mail to discuss how we can serve your needs. 847. 548.SHOX
Article Credit: SixFour Promotions
Submitted By: Scotty Thiel
