---

Scotty Thiel – Winner at Antigo!

Scotty Thiel and the Scott Thiel Motorsports team headed north Friday night to the Langlade County Fairgrounds in Antigo, Wisconsin with the IRA Series. After being second quick in qualifying and finishing second in the heat race, Thiel charged his way forward from the ninth starting position to take his 4th win of the year at the red clay half mile of Langlade Speedway!

19 cars signed into Antigo on Friday night with the IRA. Scotty was the 8th car out to qualify. He put down a 16.528 lap time, it was second quick on the night. He would go on to start fourth in the eight lap heat race event. After struggling to make passes early in the event and keeping the car straight on the super fast track, Thiel worked his way around and finished second in the heat race only by 0.058 seconds. That would place him in the redraw for the night where he went on to pick the 9th starting position for the 25 lap A-main event. A fast and narrow track was presented the A-main event. As the green flag flew, Scotty worked his way on the bottom side of the track and pulled into the sixth position coming down the back stretch. He picked his way forward lap by lap and began to challenge the leader by lap seven. He slid into the lead in the middle of turns three and four and began his charge forward. 2 caution came into play in the remaining 18 laps of the event but that did not stop Thiel from pulling a commanding lead and never looking back. After 25 laps of green flag action, Thiel would cross the line to capture his 4th win of the season! “This one feels really good. We have struggled here in the past in the main events. Always have been fast but just could never finish the job. We did that tonight! I just had to be patient starting back in the ninth spot but I knew if we could get up front early we would have good shot at the lead. These guys worked really hard all week to prepare for tonight. I can’t thank our partners and fans enough for the support!” stated an excited Scotty Thiel after the main event.

On Saturday night the team headed south to the Wilmot Raceway in Wilmot, WI to race with the World of Outlaws. After being 3rd quick in hot laps, Thiel felt confident for the rest of the night. After going out 16th in the qualifying order, he put down a 12.833 lap time which was 11th quick overall from the 29 cars in attendance. That would place him to start fourth in the ten lap heat race event. On the start of the heat race, Thiel charged the top side of the track and moved into third position right away. He battled for the second spot but came up short at the end. That finish was still a really good run and would place him in the 8th starting position for the nights 40 lap A-main event. Thiel held his ground early on in the main event. He moved up to the fifth spot in the first ten laps of the race. He moved up to the top side of the track and lost a few spots but still was holding onto the top ten. A late caution came out with only seven laps to go. On the restart, Thiel was shoved up to the wall and over drove turn one and jumped the big curb of a cushion. He gathered the car back but fell back multiple spots and just wasn’t able to move back forward after struggling to gain anything in the last six laps. He was officially scored in the 17th position after the conclusion of the 40 lap event. “I’m really disappointed in myself after starting out that strong tonight. We held our ground throughout qualifying and the heat race. Set ourselves up well starting 8th in the main event. I knew it was going to be super tough to hold our own out there but we were up to fifth at one point. I just made some bad calls driving later in the race that costed us a lot of ground. I feel like we had a good shot of sticking in the top ten forsure and maybe even the top five. Just disappointed as the results do not show how good we really were. It’s a humbling sport and we will move on and focus for next weeks IRA show.” Mentioned Scotty.

Next up on tap for the STM #64 team is this Saturday night at the Plymouth Dirt track located on the Sheboygan County Fairgrounds with the IRA Series.

STM would like to thank all of their marketing partners for all of their support in the 2017 season. They encourage everyone to check out these fine businesses and support those who support racing!

Professional Plating Inc:
Conveniently located employer in Brillion, WI; Professional Plating has been in business since 1979 with a facility over 200,000 sq. ft. to meet and exceed your expectations of supplying Class A coatings to all sorts of recreational and production customers. PPi serves customers with needs of power coating, zinc plating and e-coating! You can see their work on the web at www.proplating.com or give them a call at 920-756-2153 to discuss your next project!

Scott Thiel Builders:
Since 1985, Sheboygan, Wisconsin based Scott Thiel Builders has been in the new home building and remodeling industry serving clients all over the central lake shore counties of Wisconsin. Our outstanding reputation speaks for itself through our skilled craftsman who strive for perfection to create a masterpiece you have dreamed about. Attention to detail is used in a variety of ways at Scott Thiel Builders because we not only strive to achieve excellence on each project we work on but to also be attentive to our client and make sure they experience the best possible service through the entire building process and the years to follow. Check out what Scott Thiel Builders can provide for you today at www.scottthielbuilders.com!

Wm W. Meyer & Sons / Meyer Racing:
Today, Meyer & Sons, Inc., is a world leader in the manufacture of dry bulk material processing equipment, pneumatic conveyors, dust collectors, insulation blowing machines and vacuum collection systems. By continuing Bill Meyer's tradition of developing innovative machinery and committing to the highest standards of quality, craftsmanship and customer service, the company he founded in 1933 has continued to grow steadily into its second, third and now fourth generation of family ownership. Meyer Mission Our mission is to exceed your expectations as the preeminent manufacturer of exceptionally high quality, innovative and intelligently engineered equipment. We concentrate on providing you with value-added solutions whether you are looking for system components for air process/bulk material handling systems, or are a residential contractor or professional air duct-cleaning provider. Meyer Vision Our vision is to position Meyer as the foremost manufacturer of system components for air process/bulk material handling systems, insulation removal vacuums/blowing machines for those involved with residential insulation needs, and air duct cleaning equipment for professional residential and commercial cleaning services. Every decision that we make today is based on a long-term growth strategy that includes hiring decisions, training programs, and impeccable customer service. Check out what Meyer can offer you today by checking out wmwmeyer.com!

Complete Water Inc:
Complete Water Inc specializes in Rentals, Iron Filters, Well Inspections, Salt Delivery, Sales, Drinking Systems, Complete Well Systems, Bottled Water, Reverse Osmosis, Irrigation & Sprinkler Systems, Well Systems, Well Pumps & Pressure Tanks, Rheem, MacClean, and American Standard. Contact Complete Water for any of your water needs!

SixFour Promotions:
SixFour Promotions is a motorsports marketing company driven toward promoting motorsport events and helping drivers/teams seek potential marketing partners. From marketing proposals to full event promotions, SixFour Promotions knows what it takes to have complete marketing success. To learn more about what SixFour can offer you, look them up on www.facebook.com/SixFourPromotions

VMS Motorsports:
VMS is a family business established in 2007 and has evolved into one of the leading suppliers of rod ends and radius rods in the racing industry worldwide. From Midgets to Modifieds, Legends to Late Models and everything in between, VMS Motorsports has you covered. Individualized customer service ensures that every one of our customers gets the right piece for their application. VMS Motorsports always keeps a full inventory on hand even through the off-season. This, coupled with our Monday-Saturday shipping, ensures that VMS Motorsports gets you back on track…FAST. If you are in the market for Rod ends, radius rods and many other racing products, check out what VMS Motorsports has to offer by checking them out online at www.vmsmotorsports.com!

Hepfner Racing Products:
For well over a decade, Hepfner Racing Products (HRP) has led the industry in innovative designs and manufacturing technology. From a wide range of racing components to a full line up of trailer accessories, HRP offers a large variety of items for virtually every form of motorsports. HRP is also the manufacturer of Streeter Super Stands, the original and genuine home to kart racing's Big Foot and Stacker Stands as well as a very popular lineup of full kart racing pit & trailer accessories and kart stands. We are proud to design, manufacture, package and ship all of our products from our Hartford, WI USA facility. To learn more on what HRP can offer you, check them out on the web at hrpracing.com!

Keizer Wheels/K2W Precision Inc:
We at K2W Precision Inc have dedicated ourselves to producing a wheel of the highest quality. Holding both weight and strength as our engineering focal points, we produce many wheels which are both competitive and affordable. Our Keizer wheel parts are cold spun with U.S. aerospace quality aluminum to meet precise tolerances. Our double spun, cold, drawn parts in combination with our unique and protected heat treat processes give us our perfect part. All wheel components are made from 6061 T6 cold forged Billet and are CNC machined to specs. Our magnesium components are cast by experienced US aircraft casting suppliers, before in house CNC work begins. Lastly, we feel we have the finest service a custom racing shop can offer. All questions are welcome. We invite you to be our satisfied customer. We are the “Keizer” of the racing wheel world.

King Racing Products:
King racing products was founded by Blake & Brock Robertson in Visalia Ca. in 2007. King Racing products is a racer run company as all that are involved have some attachment to motorsports. The constant attention to detail and high quality products are what make King Racing one of the most respected brands in the industry. When the first aluminum chips hit the floor in the spring of 2007 it was the start to a new beginning. King Racing started with 1 CNC machine and a lot of ambition and dreams. The King Racing product line started with 10 items and today it consist of over 300.Over the past 9 years King Racing’s core values consist of quality products, superior customer service, product safety, product strength and making racing affordable. The Robertson’s are dedicated to the motorsports industry and want King Racing Product’s legacy to continue for many years.

QTM Brakes:
Innovations in braking since 1999 has led QTM to be one of the top brake companies in the business. From open wheel, off road, late model racing and street vehicles, QTM provides a wide range of brakes and accessories for all applications. Their innovated technology allows the brakes to be the best in the business and the stopping power is incredibly noticeable to drivers in all platforms. Check out www.qtmi.com for more information!

Triple X Race Co:
At Triple X Race Components, we don’t just build race parts – we race too. We know how expensive it is to race. That’s why we offer the most common Sprint Car, Midget, and 600 Mini Sprint parts. We keep our costs down by building thousands of each part. We build the parts that get damaged the most. With our discounted pricing, you can afford to race hard and race to win.

Torsion Bar Rate:
Torsion bar testing has been around as long as the bar has. There are many different ways to test bars, but they all have the same goal.... to compare one bar to another and give the results in a numerical value (PSI, FORCE POUNDS, RATE). This is good, but can be hard to understand. We simplify this process. The numbering system we use is standard to the torsion bar industries. During our test sessions, data is collected and stored in our software, which then calculates it to a torsion bar size that everyone can understand. We have found 1025 bars that test between a 1012 and a 1036 bar. Our test services take away the guesswork. We provide you with a TORSION BAR RATE. Check out www.torsionbarrate.com for more info!

Rhey Graphics:
Rhey Graphics will take your next project over-the-top. We can supply you with the creative edge that's become a necessity in today's competitive marketplace. So whether it's a logo design, vehicle graphics, brochure, or full-color banner, we can handle your project from start to an outstanding finished project.

Super Shox:
Since 1997 Super Shox has been dedicated to building high performance shock absorbers with extreme durability at a reasonable price. Each year more racers make the switch to Super Shox and it shows with wins and championships. Super Shox have high quality products that will give you an advantage. Besides building a quality product customer service is at the top of our list to keep you satisfied and winning races. Please give us a call or e-mail to discuss how we can serve your needs. 847. 548.SHOX

---

Back to News