Freedom Factory
Freedom Factory

Freedom Factory
Bradenton, FL

1093
12/13/2013

12/13/2013

Freedom Factory


ENDURO RACE RULES:

ENDURO RACE RULES:

NO RACE CARS PERMITTED

STOCK CARS ONLY

2 DOOR OR 4 DOOR

NO TRUCK, VAN, SUV OR CONVERTABLE

NO JEEP TYPE VEHICLE

NO 4-WHEEL DRIVE VEHICLE

CARS MAY BE FRONT OR REAR WHEEL DRIVE

4, 6 OR 8 CYLINDER ENGINES

MINIMUM STOCK WHEELBASE ALLOWED

105" FOR V-8

88" FOR V-6

4 CYL 1" TOLERANCE

NO TURBOS

ROLL CAGE RECOMMENDED OR MUST HAVE POST BEHIND DRIVER SEAT FROM FLOOR TO TOP OF CAR. STEEL BAR ON DRIVER DOOR GUTTING OF FACTORY INTERIOR PANELS ONLY ALLOWED FOR ROLL CAGE CLEARANCE. YOU MAY REMOVETHE INNER DOOR BRACING TO REPLACE WITH DOOR BARS

NO BRACING IN THE BUMPER AREAS BUMPERS SHOULD BE CHAINED OR CABLED AS A SAFETY ITEM TO HELP HOLD THE BUMPER ALL DOORS MUST BE WELDED, CHAINED OR BOLTED SHUT

WINDSHIELD MUST BE REMOVED SCREEN OR BARS SHOULD BE INSTALLED IN PLACE OF WINDSHIELD

SEAT BELTS MANDATORY

RACING SHOULDER HARNESS AND LAP BELTS ARE RECOMMENDED

RACING SEATS ARE ALLOWED

ALL BURNABLE TYPE MATERIAL, FLOOR MATS, HEAD LINERS, REAR SEATS MUST BE REMOVED

THE REAR SEAT SHELF MUST BE LEFT IN AS A FIRE STOP

ANY OPENINGS TO THE TRUNK AREA MUST BE ENCLOSED

BUMPER TO BUMPER STEEL UNI-BODY MUST BE RETAINED

NO LIGHTENING PERMITTED

THE STOCK STEEL UNALTERED FLOOR PAN, FIREWALLS, TRUNK AND WHEEL WELLS MUST BE RETAINED

FUEL CELLS PROPERLY ATTACHED MAY BE LOCATED IN THE TRUNK

CARS MUST RETAIN THEIR STOCK APPEARANCE

NO CUTTING, CHOPPING, CHANNELING OR SHORTENING ALLOWED

HOODS MUST BE KEPT IN PLACE AT ALL TIMES

MESH WINDOW NETS ARE PERMITTED AND MUST BE REMOVABLE

SUSPENSION PARTS MUST REMAIN STOCK FOR THAT MAKE AND MODEL CAR

NO SPACERS, LUMBER OR CHAINS ETC. MAY BE USED TO ALTER STOCK SUSPENSION OF CAR

NO ADDITIONAL WEIGHT MAY BE ADDED TO CAR

STOCK STEEL WHEELS ONLY

TIRES - D.O.T. LEGAL TIRES, 70 SERIES MAX
NO GUMBALL TIRES

NO DOT STAMPED RACING TIRES

NO TRUCK TIRES

NO TREATED TIRES

NO GROOVING OR SIPING OF TIRES

THE ENGINE MUST BE STRICTLY STOCK FOR THAT MAKE AND MODLE AND IN IT'S ORIGINAL MOUNTS

NO AFTERMARKET EXTERNAL OIL COOLERS

A/C AND HEAT COMPONENTS MAY BE REMOVED

SMOG EQUIPMENT MAY BE REMOVED

AIR CLEANER TO OIL PAN MUST BE ALL FACTORY EQUIPMENT

STOCK TRANSMISSION AND REAR END ONLY

NO AFTERMARKET EXTERNAL OIL COOLERS

ALL TRANSMISSION LINES MUST BE COVERED OR RUN OUTSIDE OF DRIVER AREA OF CAR

ONLY ONE RADIATOR CAN BE USED

RADIATOR MUST REMAIN IN ORIGINAL POSITION

NO COOLANT OR GAS LINES IN THE DRIVER AREA OF CAR

FUEL CELLS PERMITTED AND MAY BE PLACED IN TRUNK AREA IF SECURELY FASTENED

GAS TANK MUST BE ORIGINAL AND PLACED IN TRUNK MUST HAVE TWO MAGINETIC STEEL HOLDING STRAPS

BATTERIES MAY BE RELOCATED IN A SECURE FASTENED COVERED PLASTIC OR RUBBER CONTAINER

ALL PLASTIC GRILLS MUST BE REMOVED OR REPLACED WITH SCREEN MESH

HEADLIGHTS, TAIL LIGHTS, OUTER TRIM MUST BE REMOVED SIDE AND REAR WINDOW GLASS MUST BE REMOVED

ALL SIDE MIRRORS AND REAR VIEW MIRRORS MUST BE REMOVED

NO MIRRORS ARE ALLOWED

RUPTURE OF YOUR GAS TANK AND OR LOSS OF GAS REQUIRE AN IMMEDIATE BLACK FLAG

NO LOCKED REARS

APPROVED HELMET REQUIRED FOR EACH DRIVER
MAKE YOU AND YOUR CAR AS SAFE AS POSSIBLE
WE WILL NOT BE RESPONSIBLE FOR YOU OR YOUR COMPETITION
RELEASE FORMS WILL BE PROVIDED AT SIGN-IN GATE

THIS IS A FUN RACE AND RESPECT FOR YOUR COMPETITION AND TRACK OFFICIALS WILL BE EXPECTED

THANK YOU AND HAPPY RACING!!!!


Submitted By: Linda Jericka

Back to News

Build your brand with MRP Digital Ads